View 74HC4067N_1937356.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

d a t a sh eet product speci?cation file under integrated circuits, ic06 september 1993 integrated circuits 74hc/hct4067 16-channel analog multiplexer/demultiplexer for a complete data sheet, please also download: the ic06 74hc/hct/hcu/hcmos logic family specifications the ic06 74hc/hct/hcu/hcmos logic package information the ic06 74hc/hct/hcu/hcmos logic package outlines
september 1993 2 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 features low on resistance: 80 w (typ.) at v cc = 4.5 v 70 w (typ.) at v cc = 6.0 v 60 w (typ.) at v cc = 9.0 v typical break before make built-in output capability: non-standard i cc category: msi general description the 74hc/hct4067 are high-speed si-gate cmos devices and are pin compatible with the 4067 of the 4000b series. they are specified in compliance with jedec standard no. 7a. the 74hc/hct4067 are 16-channel analog multiplexers/demultiplexers with four address inputs (s 0 to s 3 ) , an active low enable input ( e), sixteen independent inputs/outputs (y 0 to y 15 ) and a common input/output (z). the 4067 contains sixteen bidirectional analog switches, each with one side connected to an independent input/output (y 0 to y 15 ) and the other side connected to a common input/output (z). with e low, one of the sixteen switches is selected (low impedance on-state) by s 0 to s 3 . all unselected switches are in the high impedance off-state. with e high, all switches are in the high impedance off-state, independent of s 0 to s 3 . the analog inputs/outputs (y 0 to y 15 , and z) can swing between v cc as a positive limit and gnd as a negative limit. v cc to gnd may not exceed 10 v. quick reference data gnd = 0 v; t amb = 25 c; t r = t f = 6 ns notes 1. c pd is used to determine the dynamic power dissipation (p d in m w): p d = c pd v cc 2 f i +?{ (c l + c s ) v cc 2 f o } where: f i = input frequency in mhz f o = output frequency in mhz ? {(c l + c s ) v cc 2 f o } = sum of outputs c l = output load capacitance in pf c s = max. switch capacitance in pf v cc = supply voltage in v 2. for hc the condition is v i = gnd to v cc for hct the condition is v i = gnd to v cc - 1.5 v symbol parameter conditions typical unit hc hct t pzl / t pzh turn-on time c l = 15 pf; r l =1 k w ; v cc = 5 v e to v os 26 32 ns s n to v os 29 33 ns t plz / t phz turn-off time e to v os 27 26 ns s n to v os 29 30 ns c i input capacitance 3.5 3.5 pf c pd power dissipation capacitance per switch notes 1 and 2 29 29 pf c s max. switch capacitance independent (y) 5 5 pf common (z) 45 45 pf
september 1993 3 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 ordering information see 74hc/hct/hcu/hcmos logic package information . pin description pin no. symbol name and function 1 z common input/output 9, 8, 7, 6, 5, 4, 3, 2, 23, 22, 21, 20, 19, 18, 17, 16 y 0 to y 15 independent inputs/outputs 10, 11, 14, 13 s 0 to s 3 address inputs 12 gnd ground (0 v) 15 e enable input (active low) 24 v cc positive supply voltage fig.1 pin configuration. fig.2 logic symbol. fig.3 iec logic symbol.
september 1993 4 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 applications analog multiplexing and demultiplexing digital multiplexing and demultiplexing signal gating fig.4 functional diagram. fig.5 schematic diagram (one switch). function table notes 1. h = high voltage level l = low voltage level x = dont care inputs channel on es 3 s 2 s 1 s 0 l l l l l l l l l l l l l l h h l h l h y 0 - z y 1 - z y 2 - z y 3 - z l l l l l l l l h h h h l l h h l h l h y 4 - z y 5 - z y 6 - z y 7 - z l l l l h h h h l l l l l l h h l h l h y 8 - z y 9 - z y 10 - z y 11 - z l l l l h h h h h h h h l l h h l h l h y 12 - z y 13 - z y 14 - z y 15 - z h x x x x none
september 1993 5 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 fig.6 logic diagram.
september 1993 6 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 ratings limiting values in accordance with the absolute maximum system (iec 134) voltages are referenced to gnd (ground = 0 v) note 1. to avoid drawing v cc current out of terminal z, when switch current flows in terminals y n , the voltage drop across the bidirectional switch must not exceed 0.4 v. if the switch current flows into terminal z, no v cc current will flow out of terminals y n . in this case there is no limit for the voltage drop across the switch, but the voltages at y n and z may not exceed v cc or gnd. recommended operating conditions symbol parameter min. max. unit conditions v cc dc supply voltage - 0.5 + 11.0 v i ik dc digital input diode current 20 ma for v i <- 0.5 or v i > v cc + 0.5 v i sk dc switch diode current 20 ma for v s <- 0.5 or v s > v cc + 0.5 v i s dc switch current 25 ma for - 0.5 v < v s < v cc + 0.5 v i cc ; i gnd dc v cc or gnd current 50 ma t stg storage temperature range - 65 + 150 c p tot power dissipation per package for temperature range: - 40 to + 125 c 74hc/hct plastic dil 750 mw above + 70 c: derate linearly with 12 mw/k plastic mini-pack (so) 500 mw above + 70 c: derate linearly with 8 mw/k p s power dissipation per switch 100 mw symbol parameter 74hc 74hct unit conditions min. typ. max. min. typ. max. v cc dc supply voltage 2.0 5.0 10.0 4.5 5.0 5.5 v v i dc input voltage range gnd v cc gnd v cc v v s dc switch voltage range gnd v cc gnd v cc v t amb operating ambient temperature range - 40 + 85 - 40 + 85 c see dc and ac character- istics t amb operating ambient temperature range - 40 + 125 - 40 + 125 c t r ,t f input rise and fall times 6.0 1000 500 400 250 6.0 500 ns v cc = 2.0 v v cc = 4.5 v v cc = 6.0 v v cc = 10.0 v
september 1993 7 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 dc characteristics for 74hc/hct for 74hc: v cc - gnd = 2.0, 4.5, 6.0 and 9.0 v for 74hct: v cc - gnd = 4.5 v notes 1. at supply voltages (v cc - gnd) approaching 2 v, the analog switch on-resistance becomes extremely non-linear. therefore it is recommended that these devices be used to transmit digital signals only, when using these supply voltages. 2. for test circuit measuring r on see fig.7. symbol parameter t amb ( c) unit test conditions 74hc/hct v cc (v) i s ( m a) v is v i + 25 - 40 to + 85 - 40 to + 125 min. typ. max. min. max. min. max. r on on-resistance (peak) - 110 95 75 - 180 160 130 - 225 200 165 - 270 240 195 w w w w 2.0 4.5 6.0 9.0 100 1000 1000 1000 v cc to gnd v ih or v il r on on-resistance (rail) 150 90 80 70 - 160 140 120 - 200 175 150 - 240 210 180 w w w w 2.0 4.5 6.0 9.0 100 1000 1000 1000 gnd or v cc v ih or v il d r on maximum variation of on-resistance between any two channels - 9 8 6 w w w w 2.0 4.5 6.0 9.0 v cc to gnd v ih or v il fig.7 test circuit for measuring on-resistance (r on ). fig.8 test circuit for measuring off-state current.
september 1993 8 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 fig.9 test circuit for measuring on-state current. fig.10 typical on-resistance (r on ) as a function of input voltage (v is ) for v is = 0 to v cc - gnd. dc characteristics for 74hc voltages are referenced to gnd (ground = 0 v) symbol parameter t amb ( c) unit test conditions 74hc v cc (v) v i other + 25 - 40 to + 85 - 40 to + 125 min. typ. max. min. max. min. max. v ih high level input voltage 1.5 3.15 4.2 6.3 1.2 2.4 3.2 4.7 1.5 3.15 4.2 6.3 1.5 3.15 4.2 6.3 v 2.0 4.5 6.0 9.0 v il low level input voltage 0.8 2.1 2.8 4.3 0.50 1.35 1.80 2.70 0.50 1.35 1.80 2.70 0.50 1.35 1.80 2.70 v 2.0 4.5 6.0 9.0 i i input leakage current 0.1 0.2 1.0 2.0 1.0 2.0 m a 6.0 10.0 v cc or gnd i s analog switch off-state current per channel 0.1 1.0 1.0 m a 10.0 v ih or v il v s ? = v cc - gnd (see fig.8) i s analog switch off-state current all channels 0.8 8.0 8.0 m a 10.0 v ih or v il v s ? = v cc - gnd (see fig.9) i s analog switch on-state current 0.8 8.0 8.0 m a 10.0 v ih or v il v s ? = v cc - gnd (see fig.9) i cc quiescent supply current 8.0 16.0 80.0 160 160 320 m a 6.0 10.0 v cc or gnd v is = gnd or v cc ; v os =v cc or gnd
september 1993 9 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 ac characteristics for 74hc gnd = 0 v; t r =t f = 6 ns; c l = 50 pf symbol parameter t amb ( c) unit test conditions 74hc v cc (v) other + 25 - 40 to + 85 - 40 to + 125 min. typ. max. min. max. min. max. t phl / t plh propagation delay v is to v os ; y n to z 25 9 7 5 75 15 13 9 95 19 16 11 110 22 19 14 ns 2.0 4.5 6.0 9.0 r l = ; c l = 50 pf (see fig.16) t phl / t plh propagation delay v is to v os ; z to y n 18 6 5 4 60 12 10 8 75 15 13 10 90 18 15 12 ns 2.0 4.5 6.0 9.0 t phz / t plz turn-off time e to y n 74 27 22 20 250 50 43 38 315 63 54 48 375 75 64 57 ns 2.0 4.5 6.0 9.0 r l =1k w ; c l = 50 pf (see fig.17) t phz / t plz turn-off time s n to y n 83 30 24 21 250 50 43 38 315 63 54 48 375 75 64 57 ns 2.0 4.5 6.0 9.0 t phz / t plz turn-off time etoz 85 31 25 24 275 55 47 42 345 69 59 53 415 83 71 63 ns 2.0 4.5 6.0 9.0 t phz / t plz turn-off time s n to z 94 34 27 25 290 58 47 45 365 73 62 56 435 87 74 68 ns 2.0 4.5 6.0 9.0 t pzh / t pzl turn-on time e to y n 80 29 23 17 275 55 47 42 345 69 59 53 415 83 71 63 ns 2.0 4.5 6.0 9.0 t pzh / t pzl turn-on time s n to y n 88 32 26 18 300 60 51 45 375 75 64 56 450 90 77 68 ns 2.0 4.5 6.0 9.0 t pzh / t pzl turn-on time e to z 85 31 25 18 275 55 47 42 345 69 59 53 415 83 71 63 ns 2.0 4.5 6.0 9.0 t pzh / t pzl turn-on time s n to z 94 34 27 19 300 60 51 45 375 75 64 56 450 90 77 68 ns 2.0 4.5 6.0 9.0
september 1993 10 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 note to ac characteristics for 74hc 1. due to higher z terminal capacitance (16 switches versus 1) the delay figures to the z terminal are higher than those to the y terminal. dc characteristics for 74hct voltages are referenced to gnd (ground = 0 v) note 1. the value of additional quiescent supply current ( d i cc ) for a unit load of 1 is given here. to determine d i cc per input, multiply this value by the unit load coefficient shown in the table below. symbol parameter t amb ( c) unit test conditions 74hcy v cc (v) v i other + 25 - 40 to + 85 - 40 to + 125 min. typ. max. min. max. min. max. v ih high level input voltage 2.0 1.6 2.0 2.0 v 4.5 to 5.5 v il low level input voltage 1.2 0.8 0.8 0.8 v 4.5 to 5.5 i i input leakage current 0.1 1.0 1.0 m a 5.5 v cc or gnd i s analog switch off-state current per channel 0.1 1.0 1.0 m a 5.5 v ih or v il v s ? = v cc - gnd (see fig.8) i s analog switch off-state current all channels 0.8 8.0 8.0 m a 5.5 v ih or v il v s ? = v cc - gnd (see fig.9) i s analog switch on-state current 0.8 8.0 8.0 m a 5.5 v ih or v il v s ? = v cc - gnd (see fig.9) i cc quiescent supply current 8.0 80.0 160 m a 4.5 to 5.5 v cc or gnd v is = gnd or v cc ;v os =v cc or gnd d i cc additional quiescent supply current per input pin for unit load coef?cient is 1 (note 1) 100 360 450 490 m a 4.5 to 5.5 v cc - 2.1 v other inputs at v cc or gnd input unit load coefficient e s n 0.6 0.5
september 1993 11 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 ac characteristics for 74hct gnd = 0 v; t r =t f = 6 ns note 1. due to higher z terminal capacitance (16 switches versus 1) the delay figures to the z terminal are higher than those to the y terminal. symbol parameter t amb ( c) unit test conditions 74hct v cc (v) other + 25 - 40 to + 85 - 40 to + 125 min. typ. max. min. max. min. max. t phl / t plh propagation delay v is to v os ; y n to z 9 15 19 22 ns 4.5 r l = ; c l = 50 pf (see fig.16) t phl / t plh propagation delay v is to v os ; z to y n 6 12 15 18 ns 4.5 t phz / t plz turn-off time e to y n 26 55 69 83 ns 4.5 r l = 1 k w ; c l = 50 pf (see fig.17) t phz / t plz turn-off time s n to y n 31 55 69 83 ns 4.5 t phz / t plz turn-off time e to z 30 60 75 90 ns 4.5 t phz / t plz turn-off time s n to z 35 60 75 90 ns 4.5 t pzh / t pzl turn-on time e to y n 32 60 75 90 ns 4.5 t pzh / t pzl turn-on time s n to y n 35 60 75 90 ns 4.5 t pzh / t pzl turn-on time e to z 38 65 81 98 ns 4.5 t pzh / t pzl turn-on time s n to z 38 65 81 98 ns 4.5
september 1993 12 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 additional ac characteristics for 74hc/hct recommended conditions and typical values gnd = 0 v; t r =t f = 6 ns notes 1. v is is the input voltage at y n or z terminal, whichever is assigned as an input. 2. v os is the output voltage at y n or z terminal, whichever is assigned as an output. 3. adjust input voltage v is is 0 dbm level (0 dbm = 1 mw into 600 w ). 4. adjust input voltage v is is 0 dbm level at v os for 1 mhz (0 dbm = 1 mw into 50 w ). symbol parameter typ. unit v cc (v) v is(p-p) (v) conditions sine-wave distortion f = 1 khz 0.04 0.02 % % 4.5 9.0 4.0 8.0 r l = 10 k w ;c l = 50 pf (see fig.14) sine-wave distortion f = 10 khz 0.12 0.06 % % 4.5 9.0 4.0 8.0 r l = 10 k w ;c l = 50 pf (see fig.14) switch off signal feed-through - 50 - 50 db db 4.5 9.0 note 3 r l = 600 w ;c l = 50 pf f = 1 mhz (see figs 11 and 15) f max minimum frequency response ( - 3 db) 90 100 mhz mhz 4.5 9.0 note 4 r l =50 w ;c l = 10 pf (see figs 12 and 13) c s maximum switch capacitance independent (y) common (z) 5 45 pf pf
september 1993 13 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 fig.11 typical switch off signal feed-through as a function of frequency. test conditions: v cc = 4.5 v; gnd = 0 v; r l =50 w ;r source =1 k w . fig.12 typical frequency response. test conditions: v cc = 4.5 v; gnd = 0 v; r l =50 w ;r source =1 k w . fig.13 test circuit for measuring minimum frequency response. adjust input voltage to obtain 0 dbm at v os when f in = 1 mhz. after set-up frequency of f in is increased to obtain a reading of - 3 db at v os .
september 1993 14 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 fig.14 test circuit for measuring sine-wave distortion. fig.15 test circuit for measuring switch off signal feed-through. ac waveforms fig.16 waveforms showing the input (v is ) to output (v os ) propagation delays. fig.17 waveforms showing the turn-on and turn-off times. (1) hc : v m = 50%; v i = gnd to v cc . hct : v m = 1.3 v; v i = gnd to 3 v.
september 1993 15 philips semiconductors product speci?cation 16-channel analog multiplexer/demultiplexer 74hc/hct4067 test circuit and waveforms package outlines see 74hc/hct/hcu/hcmos logic package outlines . fig.18 test circuit for measuring ac performance. conditions test switch v is t pzh t pzl t phz t plz others gnd v cc gnd v cc open v cc gnd v cc gnd pulse c l = load capacitance including jig and probe capacitance (see ac characteristics for values). r t = termination resistance should be equal to the output impedance z o of the pulse generator. t r =t f = 6 ns, when measuring f max , there is no constraint on t r ,t f with 50% duty factor. fig.19 input pulse definitions. family ampli- tude v m t r ,t f f max ; pulse width other 74hc v cc 50% < 2 ns 6 ns 74hct 3.0 v 1.3 v < 2 ns 6 ns

▲Up To Search▲

Price & Availability of 74HC4067N

	To Download 74HC4067N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .